Ice dams forms on various houses that are located in areas that receive snow falls and this is mostly experienced during the winter months. They form on the edge of the roofs when the water that comes from the melting snow freezes and ends up forming a hill on the edge that prevents further melting. The water that is held here may then seep into your house and end up causing a major damage.
It is therefore vital to try and remove the ice dams immediately after you have identified earlier signs and you can apply salt to melt it away, or you can use a rake to scrap it off. Companies that assist in the removal of the iced as having been formed to assist those individuals who find the activity difficult. For such individuals, they should ensure that they contract the best agency for the job.
For you to make sure that you only enter into a contract with the best ice dam removal company, there are some considerations that you should make. The number one factor is the level of experience that a company has. Here you should look for a company that has specialized in the field of ice dams removal for the longest period. The experienced one possess the required ice dam removal skills and expertise. The prospective ice dam removal agency should be well bonded and also have a good insurance policy.
This cover should have covered the process of ice dam removal and not other types of insurance. This is because the roof can be damaged during the process of ice dam removal and the cover will be able to pay for all the damages. Another factor that you should observe is the method used, and the best company is the one that uses the steam removal method. This is because it is the one best method of ice dam removal as it is the safest and most effective.
When using the steam method, their boiler should be effective enough to be able to heat the water to about 250 degrees that helps in easy melting of the ice. Other equipment that are used by the company should also be checked. Other these of equipments used are like the shovels and the rakes. They should be up to date with the technology which have improved function and the cutting edges should be made of plastic or have some plastic rollers if it is made of metal cutting edges. The need for this is to avoid any kind of damage to the roofs that metal edges can cause.